PAT Testing. Every Appliance Checked. Every Record Where You Need It.
- 24/7 Emergency Response
- ISO Certified
- Nationwide Coverage
Portable appliance testing is one of the most commonly mismanaged compliance obligations in building management
Performed inconsistently, documented poorly, with records that disappear when contractors change. PTSG Electrical Services delivers PAT and EET inspection with the same rigour we bring to every electrical compliance discipline: directly employed engineers, consistent standards, documentation that is always current.
What is PAT Testing?
Portable appliance testing (PAT) – now more accurately referred to as Electrical Equipment Testing (EET) – is the inspection and testing of portable electrical equipment to verify it is safe to use. It covers any electrical equipment that is not part of the fixed installation and can be connected via a plug.
There is no single law requiring PAT testing, but the Electricity at Work Regulations 1989, the Health and Safety at Work Act 1974 and the Provision and Use of Work Equipment Regulations 1998 (PUWER) require employers to ensure that electrical equipment is maintained in a safe condition. PAT testing provides the evidence that this duty has been fulfilled.
Test frequency is risk-based: equipment in high-use or harsher environments requires more frequent testing than office equipment used occasionally. PTSG can advise on appropriate intervals based on IET guidance.
Accreditations
Benefits of PAT Testing with PTSG
01
Visual and electrical inspection by NICEIC-qualified, directly employed engineers
02
Covers all portable and transportable appliances across your estate
03
Risk-based testing intervals aligned to IET Code of Practice guidance
04
Full asset inventory created and maintained on PTSG's compliance platform
05
Pass/fail labels applied to every appliance tested - clear visual status at all times
06
Failed appliances flagged immediately with removal recommendation
07
Portfolio-wide visibility - single compliance record across all sites
06
Seamless handover to a PTSG maintenance programme - same team installs and maintains
Visual and electrical inspection by NICEIC-qualified, directly employed engineers
Covers all portable and transportable appliances across your estate
Risk-based testing intervals aligned to IET Code of Practice guidance
Full asset inventory created and maintained on PTSG's compliance platform
Pass/fail labels applied to every appliance tested - clear visual status at all times
Failed appliances flagged immediately with removal recommendation
Portfolio-wide visibility - single compliance record across all sites
Real-time compliance visibility via PTSG's Clarity platform — certificates and schedules accessible at any time
Rapid response to urgent issues — directly employed engineers, nationwide coverage
Why Choose PTSG Electrical Services?
PTSG Electrical Services manages complete electrical compliance for thousands of buildings nationwide. PAT testing is rarely treated with the same rigour as fixed wire or lightning protection – but the liability if an untested appliance causes a fire or injury is the same.
Our engineers are directly employed and NICEIC-qualified. The same person who tests your appliances this year will know your building next year. Every result is documented on our compliance platform, version-controlled and retrievable on demand.
Recent Projects
Protecting a listed building, hospital or
high-rise? We’ve designed for all three.
What to Expect
01
Pre-visit asset list review or new asset inventory creation
02
Visual inspection of each appliance - lead, plug, casing, connectors
03
Electrical testing using calibrated PAT testing equipment
04
Pass/fail labelling applied to each tested appliance
05
Failed appliances flagged with written recommendation for removal or repair
06
Full test results documented on compliance platform - accessible to duty holders immediately
Pre-visit asset list review or new asset inventory creation
Visual inspection of each appliance - lead, plug, casing, connectors
Electrical testing using calibrated PAT testing equipment
Pass/fail labelling applied to each tested appliance
Failed appliances flagged with written recommendation for removal or repair
Full test results documented on compliance platform - accessible to duty holders immediately
Trusted by
Frequently Asked Questions
Is PAT testing a legal requirement?
There is no single law that specifically requires PAT testing. However, several pieces of legislation – including the Electricity at Work Regulations 1989 and PUWER – require employers to maintain electrical equipment in a safe condition. PAT testing is the accepted means of demonstrating compliance with these obligations.
How often does PAT testing need to be done?
Testing frequency is risk-based and depends on the type of equipment, its use and its environment. IET Code of Practice guidance provides a framework: handheld equipment in industrial environments may require testing every 6 months, while office IT equipment on a fixed workstation may only need testing every 4 years. PTSG can advise on the appropriate interval for your estate.
Do you test all types of portable appliances?
Yes. We test all portable and transportable electrical equipment, including IT equipment, kitchen appliances, power tools, extension leads and AV equipment. We can also inspect fixed connected equipment.
What happens to appliances that fail the test?
Failed appliances are labelled clearly with a failed sticker and removed from service with a recommendation for repair or replacement. The failure is documented in the test report with details of the fault identified.
The complete electrical compliance picture.
Finally. One team manages everything.
PTSG Electrical Services
Ready to protect your building?
Tell us about your building and one of our engineers will get back to you – usually within one working day.
- Prefer to talk? Call 01977 668771
- NICEIC-approved engineers
- Free initial risk assessment
- All work certified to BS EN 62305